 |
LSP Regulator Gasket |
|
 |
Western Medica Oxygen Flowmeter |
Polycarbonate inner and outer tubes. 1/2-15LPM with Ohmeda® adaptor. |
 |
Hudson-RCI® Replacement Yoke Gasket |
Yellow replacement yoke gaskets come in packs of 100.
|
 |
LSP Constant Flow Selector Valve |
Desgned for use on portable oxygen systems where a metered supply of
oxygen is required. Unlike standard flow meters and flow gauges, this
Valve has five distinct flowrate settings. |
 |
Flotec O2 Flow Control |
The Flotec oxygen flow controller is designed to provide a constant flow of oxygen at approximately 50 PSI for the operation of auxillary equipment. |
 |
Flotec O2 Regulator with Brass Internal Part |
Large brass lined CGA 540 cylinder connection with male DISS outlet, gauge with protective rubber boot.
|
 |
Flotec O2 Regulator Solid Brass |
Solid brass with operating Pressure: 250-3000 PSI, outlet Pressure:
Nominal 20 PSI, 30 PSI, or 50 PSI and flow capacity of minimum 20 cc,
maximum 60 LPM through the 12 position selector.
|
 |
Flotec Crocagator™ Manifold Assembly |
O2 minilator, Crocagator manifold assembly and replacement flow control valve.
|
 |
Flotec O2 Regulator with Brass Internal Parts |
Single stage, piston type. Pressure reducer cartridge with an internal
relief valve. "Click style" flowmeter module offers 12 flow settings.
Will operate in any position while moving.
|
 |
Flotec INGAGE™ Regulator |
The Flotec INGAGE™ is a medical gas regulator with a unique pressure gauge built into the body with a window to show the cylinder pressure. Available with internal solid brass core or solid brass body.
|
|
|
Flotec O2 Regulator Replacement Parts |
|
 |
Spiracle BravO2 Oxygen Regulator |
The BravO2 regulator body is constructed from a solid piece of brass, creating a uni-body style regulator that provides added strength and safety. |
 |
Spiracle ORO2™ Oxygen Regulator |
The ORO2™ Regulator has a strong uni-constructed body, low profile and fixed orifice flow control with window-style flow reading. |
 |
LSP Brass Oxygen Pressure Regulators |
The uni-body construction is designed to strengthen the regulator,
minimize potential leak paths, and prevent breakage of the yoke
cylinder connection assembly. For additional safety, inlet filters
provide gas filtration down to 20 microns. |
 |
Flotec O2 Regulator |
Unique dome style handle has a built in torque limiting design! Available brass lined or solid brass.
|
 |
Western Medica Titan Series Regulators |
All brass, 0-15 lpm, CGA 870. Available without DISS, or 1 DISS with power take-off.
|
